SECTION 2 -- CONTROLS, INSTRUMENTS AND OPERATION
2--27
Air Suspension Seat
(where fi tted)
The air suspension seat provides a full range of
adjustments for driver comfort including an
electrically controlled air suspension system which
can be adjusted to suit individual operator weight.
Lift the travel adjustment lever (1) to move the seat
forward or backward.
The seat is permitted a limited, spring controlled
fore/aft movement (float) when the travel isolator
lever (2) is moved to the left. Moving the lever to the
right will lock isolator movement.
The adjusters (3) on the underside of the armrests
may be turned to alter the angle of the armrests. Turn
them clockwise to raise the front of the armrests, turn
anti-clockwise to lower. Both armrests may be raised
to the vertical position if required.
48
The backrest may be tilted to suit the operator . Lift
the lever (4) on the left-hand side of the seat frame
and adjust the inclination of the backrest. The
backrest will lock in position when the lever is
released.
To facilitate observation of an implement attached to
the rear of the tractor , the seat may be rotated to the
left or right. Lift the lever (5) and rotate the seat as
desired. From the straight ahead position there are
two positions to the right and one to the left. Release
the catch to lock the seat.
Adjustments to the air suspension are made by
operating the air pump control button (6), a weight
indicator (7) will show the optimum setting for the
seat suspension.
A storage pouch is provided on the back of the seat.
The seat can be fitted with an optional upper back
support where required, consult your authorised
dealer.
49
To Next Page
Loading...
Need help?
General
