EasyManuals Logo
Home>New Holland>Tractor>T6010

New Holland T6010 User Manual

New Holland T6010
412 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #115 background imageLoading...
Page #115 background image
SECTION 2 -- CONTROLS, INSTRUMENTS AND OPERATION
2--87
Setting the Forward/Reverse Shuttle Gear
Start the engine and, with the clutch pedal
depressed, place the shuttle lever (1) in the forward
position. Do not release the clutch pedal. Using the
upshift/downshift buttons, set the forward gear.
Move the shuttle lever into reverse and repeat the
procedure to set the reverse gear. With the forward
and reverse gears set, return the shuttle lever to
neutral and release the clutch pedal. Shuttle Mode is
now activated.
NOTE: Selecting the shuttle gear with the lever in
neutral will result in the same ratio being set for both
forward and reverse.
WARNING
To prevent inadvertent tractor movement, always
stop the engine, place the shuttle lever in neutral and
firmly apply the parking brake before leaving the
tractor. The transmission will not prevent the tractor
from rolling when the engine is shut off.
129
Auto Take Off
The Auto Take Off feature permits the operator to
engage drive without using the clutch pedal by simply
moving the shuttle lever from neutral to the forward
or reverse position.
The Auto Take Off function is automatically enabled
under normal starting conditions. i.e. operator in the
driving seat, clutch pedal depressed, shuttle lever in
neutral.
After selecting the appropriate gear ranges with the
main shift lever simply move the shuttle lever to the
forward or reverse position without depressing the
clutch pedal. The Auto Take Off function will provide
a controlled start from rest.
130
NOTE: The Auto Take Off function will be disabled
if the vehicle is at rest with the shuttle lever in the
neutral position and the operator leaves the seat.
Should Auto Take Off be disabled for any reason, the
operator should carry out the following procedure to
re--enable this function.
While sitting in the seat, release the handbrake and
cycle the clutch pedal. The vehicle will then move off
in the direction selected on the shuttle lever.
Once enabled, the Auto Take Off function will
continue to function as long as the operator remains
in the seat.

Table of Contents

Other manuals for New Holland T6010

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the New Holland T6010 and is the answer not in the manual?

New Holland T6010 Specifications

General IconGeneral
BrandNew Holland
ModelT6010
CategoryTractor
LanguageEnglish

Related product manuals