New Holland T6010 User Manual

SECTION 5 -- FAULT FINDING
5--7
TRANSMISSION -- ELECTRO COMMAND
Clutch leaking or drive plates worn. See your authorised dealer.
Low oil level. Add oil, as required.
Incorrect oil grade/viscosity. Drain and refill with oil of the correct
specification.
Dirty or blocked transmission Clean.
oil cooler.
PROBLEM POSSIBLE CAUSE CORRECTION
High transmission
operating tempera-
ture
Low oil level. Add oil, as required.
Incorrect oil grade/viscosity. Drain and refill with oil of the correct
specification.
Worn bearings or failed parts. See your authorised dealer.
Noisy transmission
Incorrect linkage adjustment or Adjust linkage, replace worn parts or
worn linkage. see your authorised dealer.
Worn shift forks/selectors. See your authorised dealer .
Worn bearings. See your authorised dealer.
Gear engagement
difficult
Error code will indicate source of See your authorised dealer.
malfunction.
Tractor does not
drive in any gear
T ransmission clutch fill time out See your authorised
of adjustment. dealer.
Poor inching control
when using inching
pedal (clutch pedal)
Jerky gear shifting Transmission clutches require Perform transmission clutch calibration
calibration. procedure or see your authorised dealer.
Low oil level. Add oil, as required.
Incorrect oil grade/viscosity. Drain and refill with oil of the correct
specification.
Blocked transmission oil filter. Replace filter.
Low transmission oil
pressure
T ransmission requres calibrating. See your authorised dealer.
Worn synchronisers/couplers. See your authorised dealer .
Gear linkage out of adjustment.
Jumping out of gear
or holding in gear
Clutch squeal/whine
when inching
Jerky powershifting
or tractor stops

New Holland T6010 Specifications

General

Brand	New Holland
Model	T6010
Category	Tractor
Language	English