62 – ENGLISH
PRODUCT MAINTENANCE
18
18 PRODUCT MAINTENANCE
The automation must be subjected to maintenance work on a regular ba-
sis in order to guarantee it lasts.
a
Maintenance must be carried out strictly in compliance
with the safety provisions provided in this manual and in
accordance with the laws and regulations in force.
To carry out maintenance on the gearmotor:
1. schedule maintenance interventions within maximum 6 months or
after maximum 3.000 manoeuvres from the previous maintenance
intervention
2. disconnect all power supplies, including any back-up batteries
3. check for any deterioration in the materials making up the automa
-
tion, with special emphasis on erosion or oxidation of the structural
parts; replace any parts that are not to standard
4. check the state of wear of moving parts: pinion, rack and all gate
leaf components; replace any worn parts
5. connect the power supplies again and run all the tests and checks
described in the “Testing” paragraph (page 19).
PRODUCT DISPOSAL
19
19 PRODUCT DISPOSAL
l
This product is an integral part of the operator and must
therefore be disposed of with it.
As with the installation, only qualied personnel must dismantle the prod-
uct at the end of its life.
This product is composed of different types of materials. Some of these
materials can be recycled; others must be disposed of. Please enquire
about the recycling or disposal systems in place in your local area for this
type of product.
a
WARNING
Some parts of the product may contain polluting or dan-
gerous substances. If not disposed of correctly, these
substances may have a damaging effect on the environ-
ment and human health.
l
As indicated by the symbol shown
here, this product must not been
disposed of with household waste.
Separate the waste for disposal and
recycling, following the methods stip-
ulated by local regulations, or return
the product to the seller when pur-
chasing a new product.
a
WARNING
Local regulations may impose heavy penalties if this
product is not disposed of in compliance with the law.