1
Introduction
OMNUC G5-series (Pulse-train Input Type) AC Servomotors and Servo Drives User’s Manual
Introduction
Thank you for purchasing an OMNUC G5-series Servo Drive (Pulse-train Input Type). This User’s
Manual describes the installation and wiring methods of the OMNUC G5-series Servo Drives (Pulse-
train Input Type) and parameter setting method which is required for the operation, as well as
troubleshooting and inspection methods.
This User’s Manual is intended for the following personnel, who must also have knowledge of electrical
systems (an electrical engineer or the equivalent).
• Personnel in charge of introducing the FA equipment
• Personnel in charge of designing the FA systems
• Personnel in charge of managing the FA systems and facilities
This User’s Manual contains information you need to know to correctly use the OMNUC G5-series
Servo Drives (Pulse-train Input Type) and peripheral equipment.
Before using the Servo Drive, read this User’s Manual and gain a full understanding of the information
provided herein.
After you finished reading this User’s Manual, keep it in a convenient place so that it can be referenced
at any time.
Make sure this User’s Manual is delivered to the end user.
Intended Audience
Notice
To Next Page
Loading...
Need help?
General
