149
Memory Initialization Section 6-4
6-4-6 Initializing the Memory Switches
Initialization returns all the memory switches of the NT31/NT31C to their sta-
tus on shipment.
Initialize the memory switches by following the menu operation from the Sys-
tem Menu shown below.
If No is selected, the NT31/NT31C returns to the MEMORY INIT. MENU
screen without initializing the memory switches.
On completion of memory switch initialization, the message Finished is dis-
played and the NT31/NT31C returns to the MEMORY INIT. MENU screen.
Select Maintenance Mode.
Select Memory Init..
Select Memory Switch.
Select Yes.
Ver 4.12
The memory tables are initialized.
During initialization, the message
Initializing is displayed.
To Next Page
Loading...
Need help?
General
