175
System Settings Section 6-9
• To quit the memory switch setting screen without confirming the settings,
press the Abort touch switch. The NT31/NT31C will return to the MAIN-
TENANCE MODE MENU screen with the previous settings still in effect.
6-9-6 Setting the Print Method (NT31C Only)
The NT31/NT31C has a function for printing out data at a printer connected to
it in response to an instruction from the host or operation at the NT31/NT31C.
When using the NT31C, the currently displayed screen image or other data
can be printed out in color. You can select whether screen data is actually
printed out in color, or in monochrome tones that represent colors, with this
memory switch setting.
When PCL 5 is set for Printer Controller, the setting is fixed as Tone.
• Color: Color images are printed in color.
• Tone: Color images are printed in monochrome tones.
The default (factory) setting is Tone.
Reference: • In addition to this setting, NT31C has the Printer Controller setting
(page 173).
• For details on the print function, refer to 2-15-7 Print Function in the Ref-
erence Manual.
Set the print method setting by following the menu operation from the System
Menu shown below.
Select Maintenance Mode.
Select Memory Switch.
Ver 4.12
Press Print Method to display the required
printing method.
The setting option changes each time the
touch switch is pressed.
To Next Page
Loading...
Need help?
General
