Cameras/Lighting
ZFX-C User’s Manual
3
SETTING THE MEASUREMENT CONDITIONS
105
Partial Function Settings
Set the image capture area. Limiting the image capture area in this way speeds up processing.
The items that can be selected by this function change according to the camera connected to the Controller
and shutter speed conditions.
List of Available Functions for Each Camera p.177
When the partial function setting is changed, the size of the input image also changes. When the partial function setting has been changed,
set the measurement conditions including the model conditions of measurement items and position shift compensation again.
X MENU mode - [Setup] - [Cameras] - [Camera 0/1] - [Partial Function]
Each selection of [Size] switches the image capture area in the following order:
Adjustment of Image Capture Area
Image Rate
Set the Image Rate mode for capturing images. Setting a faster image rate increases the processing speed,
though precision becomes worse.
The items that can be selected by this function change according to the camera connected to the Controller
and shutter speed conditions.
List of Available Functions for Each Camera p.177
When the Image Rate mode is changed, the size of the input image also changes. When the partial function setting has been changed, set
the measurement conditions including the model conditions of measurement items and position shift compensation again.
X MENU mode - [Setup] - [Cameras] - [Camera 0/1] - [Image Rate]
When 1/2 display or 1/4 display is displayed, the capture area can be adjusted up and down.
Setting value Description
Fine The image is captured at normal size. (default value)
Normal, High speed The image is captured and then compressed.
Normal: 2 pixels each in the horizontal and vertical directions
are compressed to 1 pixel when they are captured.
High speed: 4 pixels each in the horizontal and vertical
directions are compressed to 1 pixel when
they are captured.
To Next Page
Loading...
Need help?
General
