Bank Settings
134
ZFX-C User’s Manual
Bank Settings
The ZFX-C can hold up to 32 sets of settings, which are called a "bank," in internal memory. Bank 0 is
displayed as the default bank when the Controller is turned ON. Banks 1 to 31 are also provided in addition to
this. The device setup can be changed easily by just switching banks if banks are registered to suit specific
conditions and content.
The number of banks can be increased to 1024 by attaching an SD card (capacity: 256MB). 32 banks are handled
as a single group, and up to 32 groups can be set. In other words, this means that 32 bank groups are the same as
having set 1024 banks.
In this case, bank group 0 is saved on the Controller's internal flash memory, and bank groups 1 to 31 are saved on
the attached SD card.
Bank group 0
Bank group 0
1
2
Bank group 31
Max. 1024 banks
When an SD card is not used, only bank group 0 is used.
When the SD card is mounted, bank groups 1 to 31 can be used.
Bank group 0: Data is saved on internal flash memory.
Bank groups 1 to 31: Data is saved on SD card.
SD card
(capacity: 256 MB)
Bank 0
Bank 1
Bank 30
Bank 31
Bank 0
Bank 1
Bank 30
Bank 31
Bank 0
Bank 1
Bank 30
Bank 31
Bank 0
Bank 1
Bank 30
Bank 31
Bank 0
Bank 1
Bank 30
Bank 31
To Next Page
Loading...
Need help?
General
