Omron ZFX-C User Manual

Signal I/O
164
ZFX-C User’s Manual
Output Signal
Measurement results are output each time a measurement is made. Measurement values and judgment
results can be output as the measurement results. Up to 32 data are output respectively (except for overall
judgment result outputs.) They are output for the number of times in the expression set at “Calculation“.
Data is output only when the ZFX-C is in the RUN mode; data is not output when the ZFX-C is in ADJ mode.
p.115
After measurements have been made in the RUN mode, the data that is output to the OR and DO signals is retained
until new measurements are made in the RUN mode. The status of these output is retained even if the ZFX-C is
switched from the RUN mode to another Mode.
000
001
002
127
000
001
002
127
000
001
002
000
001
002
000
001
002
127
000
001
002
000
001
002
127
000
001
002
000
001
002
127
000
001
002
Expression
Only the preset data is output.
For example, only data 0 and data 7 are
output when data 0 and data 7 is set.
Data 31
Judgment 31
Variable 31
Data output
Only the preset judgment is output.
For example, only judgments 0 to 15 are
output when judgment 0 is set, and the
remaining judgment results are not output.
Judgment
output
Note

Omron ZFX-C Specifications

General

Brand	Omron
Model	ZFX-C
Category	Accessories
Language	English