Omron ZFX-C User Manual

Additional Functions
ZFX-C User’s Manual
3
SETTING THE MEASUREMENT CONDITIONS
121
Erasing Measurement Values
This function allows you to erase (reset) accumulated data without having to turn the Controller OFF.
X MENU mode - [Setup] - [Add func] - [Logging monitor] - [Log0/1/2] - [Erase]
File Format
The format of files saved on SD card are as follows:
*1: When a warning is inserted consecutively for even one of logs 0 to 2, the measurement values are logged.
*2: Commas are aligned where logs are not set.
Example: 1,<measurement value>,,,<time>
Difference between NG count and warning count
Saving/Loading Data p.150
The display range of the graph's horizontal and vertical axes can be changed in the ADJ mode.
Adjusting Logging Monitor Conditions p.131
The "NG count" is the number of times that the measurement value exceeds or falls below the warning level.
The "warning count" is the number of times that the measurement value exceeded or fell below the warning level
continuously for the number of times set for the warning count or more in the setup conditions.
Note
<max. value>,<min. value>,<average value>,<standard deviation>,<measurement count>,<NG count>,<NG rate>,<warning count>
<max. value>,<min. value>,<average value>,<standard deviation>,<measurement count>,<NG count>,<NG rate>,<warning count>
<max. value>,<min. value>,<average value>,<standard deviation>,<measurement count>,<NG count>,<NG rate>,<warning count>
0,<log 0 measurement value>,<log 1 measurement value>,<log 2 measurement value>,<time>
1,<log 0 measurement value>,<log 1 measurement value>,<log 2 measurement value>,<time>
2,<log 0 measurement value>,<log 1 measurement value>,<log 2 measurement value>,<time>
...
...
...
...
99,<log 0 measurement value>,,,<time>
0,<log 0 measurement value>,<log 1 measurement value>,<log 2 measurement value>
1,<log 0 measurement value>,<log 1 measurement value>,<log 2 measurement value>
2,<log 0 measurement value>,<log 1 measurement value>,<log 2 measurement value>
...
...
...
9999,<log 0 measurement value>,<log 1 measurement value>,<log 2 measurement value>
Log 0 statistical data
Log 1 statistical data
Log 2 statistical data
latest
1 previous
2 previous
99 previous warning
99 previous
Measurement result
at warning *1,2
(max. 100 results)
Data is delimited by a comma ","
Measurement result
on graph *2
(10,000 latest results)
latest warning
1 previous warning
2 previous warning
Note
NG count
Warning count
Warning value
(upper limit)
Measurement value
80
0 1 2234 566
0000001 2
2
105
22
77
104
108
111
101
99
100
Warning value
(lower limit)
40

Omron ZFX-C Specifications

General

Brand	Omron
Model	ZFX-C
Category	Accessories
Language	English