Omron ZFX-C User Manual

Error Messages and Corrective Actions
176
ZFX-C User’s Manual
Error Messages and Corrective Actions
The following shows error messages that are displayed on the LCD screen and their corrective actions.
Error message Probable cause Reference
Draw at least one OR
figure.
The NOT figure mode is used to delete part of a drawn area.
Draw in the OR region.
p.213
SD card access error An error occurred during accessing of the SD card.
• Make sure that the SD card is inserted.
• Make sure that the SD card is not locked.
• Make sure that the attribute of files on the SD card is not read-only.
• Make sure that the SD card has not run out of free space.
-
Illegal syntax in
expression.
An operation expression setting is probably illegal as follows:
• The number of brackets on the left and right differ.
• The region Nos. are continuous.
• The operators are continuous.
• The constants are continuous.
• The functions are continuous.
• There are not enough or too many function arguments.
p.115
Automatic setting failed. Make sure that images are being captured appropriately.
If images are too dark, adjust the shutter speed or the brightness of the lighting.
p.104,
106
Camera error A camera connection error occurred.
Make sure that the connector between the camera and the Controller is con-
nected correctly.
p.29
Calibration failed. Execute sampling or specify points at three locations that are not on a straight
line.
p.107
SYSTEM ERROR
(BOOT error)
A hardware error occurred.
A probable cause is a Controller malfunction.
Contact an OMRON sales representative.
-
Input value is incorrect. The input numerical values are not within the permissible range.
Change the numerical values so that they are within the permissible range.
-
Passward is incorrect. Input the correct password. p.146
Insufficient free space of
memory.
Delete unwanted banks and measurement items. p.135
Model registration failed. Make sure that images are being captured appropriately.
If images are too dark, adjust the shutter speed or the brightness of the lighting.
p.104,
106
Loaded file is incorrect. Specify the correct file and load the file again. p.150
Fan error! A fan error occurred.
A probable cause is a Controller malfunction.
Contact an OMRON sales representative.
-

Omron ZFX-C Specifications

General

Brand	Omron
Model	ZFX-C
Category	Accessories
Language	English