System Settings
ZFX-C User’s Manual
5
ADDITIONAL FUNCTIONS
147
Measurement Control Conditions
Set and change measurement processing-related functions.
Measurement Image Save Conditions
Sets the conditions for saving measurement images.
Saving measurement images
X MENU mode - [System] - [Measure] - [Image storage]
Saved Image Delete Conditions
Sets the conditions for clearing saved images.
X MENU mode - [System] - [Measure] - [Image deletion]
Up to 100 images can be saved. When the number of saved images exceeds 100, new images are saved by over-
writing the oldest image. Up to 50 images are saved to one camera when two cameras are connected. When the
Controller is turned OFF, images saved on the Controller are cleared.
Saved images only can also be cleared without turning the Controller OFF.
p.149
Setting value Description
None Measurement images are not saved. (default value)
Only NG Measurement images are saved only when the measurement result is NG.
All All measurement images are saved regardless of the measurement result.
Setting value Description
At bank switch Clears saved image at bank switching. (default value)
OFF Disables clearing of saved image at bank switching.
To Next Page
Loading...
Need help?
General
