Omron ZFX-C User Manual

Setting Measurement Items
88
ZFX-C User’s Manual
Image adjustment (if necessary)
The following items can be changed and set to the image of the measurement target.
X MENU mode - [Setup] - [Item] - [Img Adj]
Possible output results
The following values can be output when expressions are set.
Item Description
Select camera
For details, see "Image Adjustment". p.99
Color filter
Filtering
BGS level
Item Description Message
Judgment result The judgment result is output. (0:OK, -1:NG, -2: not measured) Judge (JG)
Density average The average of the density inside the measurement region is out-
put. (0 to 255.0)
Density average (AV)
Density deviation The brightness fluctuations in the measurement region are output.
(0 to 127.0)
Density deviation (DV)
Reference density aver-
age
The density average when the measurement region is set is output.
(0 to 255.0)
Ref. average (SA)
Reference density
deviation
The density deviation when the measurement region is set is out-
put. (0 to 127.0)
Ref. deviation (SD)
Density average
difference
The difference obtained by "measurement value - reference value"
is output. (0 to 255.0)
Average dif. (DA)
Density deviation
difference
The difference obtained by "measurement value - reference value"
is output. (0 to 127.0)
Deviation dif. (DD)

Omron ZFX-C Specifications

General

Brand	Omron
Model	ZFX-C
Category	Accessories
Language	English