Pyronix 256 User Manual

PCX SMS AND PCX 256 SYSTEM MANUAL
RINS871-3 Page: 159
Phonebook
This function allows you to change the SMS telephone numbers that are programmed for the text messaging
service. The numbers will usually be programmed by your engineer. Here you will be able to alter each of the
numbers.
NOTE: The SMS facility must first be programmed by your engineer
1. Use the mand
keys to scroll to ‘PHONEBOOK’. Press the key.
2. Select which SMS number you would like to view (telephone numbers 1 to 4) and press the
key.
If you would like to change this number, you can use the m and p keys to go backwards and forwards
through the number, to delete a number press the nkey. Once the number has been deleted and/or
you have entered a new number, press the
key. Press the  key to return to the manager menu.
Walk Test
The walk test enables you to check that all the detectors are working properly.
1. Use the mand
keys to scroll to ‘WALK TEST’. Press the key. The following will be displayed:
D
C
B
A
Walk Test Parts
[0123456789ABCD]
Tag
,/+.
JKL
ABC
MNO
DEF
PQRS
GHI
TUV
WXYZ
SPACE
2. Enter the partitions you would like to test using the numeric and kmn and p keys then press the
key.
3. The inputs to be tested will scroll on the bottom line of the display.
4. Walk around the premises, ensuring that you pass each detector to be tested on the relevant partition(s).
As each detector is activated, a chime will be played and the input will be removed from the scrolling list.
Once all detectors have been activated, the display will show ‘Walk Test Completed’. Press the
key
to complete the test, you will be returned to the manager menu.
Bell Test
This function tests the Bell and Strobe outputs connected onto the system.
1. Use the mand
keys to scroll to ‘BELL TEST’. Press the key.
2. The bell and strobe will activate if the bell is installed correctly. Press the
key to return to the
manager menu.

Pyronix 256 Specifications

General

Brand	Pyronix
Model	256
Category	Security System
Language	English