Allow Engineer Menu
If this function is enabled, the engineer will require authorisation from the user to access the Engineers
menu.
1. Use the mand
keys to scroll to ‘ALLOW ENGR MENU’. Press the key.
2. Select the following:
¾ Enter ‘0’ = No – To disallow engineer access (only accessible from the manager mode)
¾ Enter ‘1’ = Yes – To allow engineer access
3. Press the
key, you will be returned to the engineer menu.
Block Remote Arm
PLEASE NOTE THIS FEATURE ISNT AVAILABLE ON THE PCX 26/SMS
Your alarm may be configured so that your alarm installation company or company manager can arm or
disarm the system remotely via the PC. Should you wish to block this access, select ‘Yes’ for this function.
1. Use the mand
keys to scroll to ‘BLOCK REMOTE ARM’. Press the key.
2. Select the following:
¾ Enter ‘0’ = No – To block remote arming
¾ Enter ‘1’ = Yes – To allow remote arming
3. Press the
key, you will be returned to the engineer menu.
Block UDL
If this function is enabled, connecting to the PCX system via the PC software (upload/download software) will
be only allowed in the Engineers Mode.
1. Use the mand
keys to scroll to ‘BLOCK UDL’. Press the key.
2. Select the following:
¾ Enter ‘0’ = No – To allow upload/download access
¾ Enter ‘1’ = Yes – To block upload/download access
3. Press the
key, you will be returned to the engineer menu.
Enter Anti-Code
This function will tell you if there are any engineer / anti-code features turned on.
You must enter your anti-code / engineer code to fully reset the system.
Exit Manager Mode
Select this option to save any changes you have made, and return to disarmed mode.
To Next Page
Loading...
Need help?
General
