PCX SMS AND PCX 256 SYSTEM MANUAL
Page: 64 RINS871-3
13.8 System Displays
Please see page 42, “Text Programming” section for this function as it requires programming partition text,
sign on messages etc.
13.8.1 Partition Texts
You may choose how you want each Partition/Level Arm to be displayed, i.e. “Partition A” may be used to
fully arm a house therefore you may want to call it “Full House Arm” for example. You can have a maximum
of 16 characters on the display.
13.8.2 Sign On Message
The Sign on Message is the main display on the top line in disarmed mode.
13.8.3 Site Name
The Site Name is used as a “Site Reference” which if used must be also used within the PCX
Upload/Download Software in order for the software to connect to the PCX system.
13.8.4 Display When Arm
If this option is enabled, then the Partition Text will be displayed on the LCD keypad once the system is fully
armed. This option is not available on the PCX 26/SMS.
Visual Keypad Programming Procedure
SYSTEM DISPLAYS
System Displays
Using the mand Pkeys, scroll to ‘SYSTEM
DISPLAYS?’
Press the Okey
Partition Text
Enter the desired text for the partition; press the
Okey to enter the text for all other partitions. You
can also add/change the text for “Full” partition
arming, the sign on message and the site name label.
Press the Okey once you have changed each text
display.
Display When Arm
Enter : for No
Enter : for Yes
Press the Okey.
You will be returned to the Engineer Menu.
To Next Page
Loading...
Need help?
General
