Chapter 3: Waypoints 33
View / edit waypoint details
You can view and edit the details of any waypoint that has been cre-
ated and stored.
To view waypoint information
1. Highlight a waypoint with the cursor.
2. Press the VIEW AND EDIT DETAILS softkey.
or
1. Press the WPTS/MOB button.
2. Press the REVIEW AND EDIT WAYPOINTS softkey.
Note: Use the second method to view details for an active
waypoint.
Editing waypoint details
When you create a waypoint, the system automatically assigns it a
name, symbol and group. You can change these details and add
comments if required. This is particularly useful if you are managing
large groups of waypoints.
The default waypoint symbol is - X.
You can select different waypoint symbols to differentiate between
groups of waypoints (fishing or diving locations, for example). When
a waypoint is active (being navigated to) it is highlighted by a red
box placed around the symbol.
You can choose any of the following symbols to show your
waypoints:
To edit waypoint details:
1. Press the WPTS/MOB button.
D9440_1
Default symbol
81314-1_A Series Reference Guide.book Page 33 Thursday, August 28, 2008 9:23 AM
To Next Page
Loading...
Need help?
General