Renesas PG-FP5 User Manual

PG-FP5 CHAPTER 1 OVERVIEW
R20UT0008EJ0400 Rev. 4.00 Page 15 of 240
Jul 15, 2010
Downloaded data will be self-tested for accuracy when the FP5 is started, during downloads and when programming
areas are changed.
<Notification function>
When Autoprocedure (E.P.) is executed, whether execution is completed normally is indicated by beeps.
<Checksum calculation>
Checksum calculation for the download program files is possible.
1.5 Operating Environment
This section explains the following items with respect to the operating environment.
• Hardware environment
• Software environment
1.5.1 Hardware environment
(1) Host machines
• IBM PC/AT
TM
compatible
• Equipped with USB 2.0 ports (compatible with 1.1)
• Equipped with RS-232C serial ports
(2) Hardware option tools that support FP5
• Target board QB-xxxx-TB (a product of Renesas Electronics, sold separately)
• Program adapter FA-xxxx (a product of Naito Densei Machida Mfg. Co., Ltd., sold separately)
• IC clip type target cable FA-CLIP (a product of Naito Densei Machida Mfg. Co., Ltd., sold separately)
• Switch jig FL-SW/FP5 (a product of Naito Densei Machida Mfg. Co., Ltd., sold separately)
• Buffer board FL-BUF (a product of Naito Densei Machida Mfg. Co., Ltd., sold separately)
• Long target cable FL-TCxxxx (name undetermined, a product of Naito Densei Machida Mfg. Co., Ltd., sold
separately)

Renesas PG-FP5 Specifications

General

Brand	Renesas
Model	PG-FP5
Category	Motherboard
Language	English