PG-FP5 CHAPTER 1 OVERVIEW
R20UT0008EJ0400 Rev. 4.00 Page 16 of 240
Jul 15, 2010
1.5.2 Software environment
(1) OS (either of the following)
• Windows 2000
• Windows XP
• Windows Vista
TM
Caution Installation of the latest Service Pack for the OS used is recommended.
(2) FP5 parameter file (PR5 file)
• Parameter file for the target device used (*.pr5)
Reference Download the parameter file from the following Renesas Electronics website.
URLs
Japanese version: http://www2.renesas.com/micro/ja/ods/
English version (Except for Europe area): http://www2.renesas.com/micro/en/ods/
→ Click “Version-up Service”.
Select the microcontroller to be used in the Each Device Series column and select the
device name in the Device Name column; the FP5 parameter file can then be found.
English version (For Europe area): http://www.renesas.eu/update → Section PG-FP5-EE
(3) Customized setup file (ESF file)
• File (*.esf) in which programming environment settings set with the programming GUI is saved
(4) Program files
The following types of HEX files can be used as program files. These files can be in Intel HEX format or Motorola
HEX format.
• HEX file: A HEX file of Intel HEX format type or Motorola HEX format type without option data
• HCUHEX file: A HEX file that integrates option data into a HEX file
Caution Be sure to sort the addresses in ascending order, even though they are not required to be
successive. An empty area will be supplemented by FFH when it is downloaded to FP5. If
addresses are downloaded to FP5 using the programming GUI, the GUI can be set to
automatically sort the addresses into ascending order.
(5) Software option tools that support FP5
• Simplified control software for production line (FPterm) (a product of Naito Densei Machida Mfg. Co., Ltd., sold
separately)
Note
• Gang-supported software for production line (FW-GFP) (a product of Naito Densei Machida Mfg. Co., Ltd., sold
separately)
Note Under development
<R>
<R>
<R>
To Next Page
Loading...
Need help?
General
