PG-FP5 CHAPTER 8 USAGE COMMUNICATION COMMANDS
R20UT0008EJ0400 Rev. 4.00 Page 154 of 240
Jul 15, 2010
8.4.10 hlp command
Lists available commands with brief descriptions.
Input format
'hlp'
Description of the function
Lists frequently-used commands with brief descriptions.
Example of usage
Command Screen output
hlp See below.
-------------- Control commands --------------
downprm/downset : Download parameter/customer settings
upprm /upset : Upload parameter/customer settings
lod : Download Intel Hex or Motorola S-record file
hex/srec : Upload Intel Hex / Motorola S-record file
progarea : Change Progam area
files : Show downloaded HEX/SREC files in FP5 memory
prm : Show Parameter file (PRM/SET) information
conf : Show / Modify FP5 configuration
security : Show / Modify FP5 Security settings
brt : Set baudrate to host
fcks : Calculate file checksum (FP5 memory)
fill : Fill memory
ver : Show firmware version
res : Reset FP5
pwr_off : Switch OFF FP5 immediately / set auto Power OFF
sound : Enable / Disable sound generation
trc : Show Device communication trace
version_up : Update firmware version
fpga_up : Update FPGA version
selftest : Perform a Selfcheck
-------------- Device commands ---------------
bln : Blankcheck
ers : Erase
prg : Program
vrf : Verify
read : Read
ep : Erase and Program
sig : Show device signature
sum : Get device checksum
scf : Set security information
To Next Page
Need help?
General
