PG-FP5 CHAPTER 1 OVERVIEW
R20UT0008EJ0400 Rev. 4.00 Page 17 of 240
Jul 15, 2010
1.6 Hardware Specifications
Table 1-1. Hardware Specifications (1/2)
Hardware Items Specifications
Operating power
supply
Supplied via AC adapter (15 V)
Operating
environment
ccondition
Temperature: ±0 to +40°C
Humidity: 10% to 80% RH (no condensation)
Storage
environment
ccondition
Temperature: −15 to +60°C
Humidity: 10% to 80% RH (no condensation)
Package size 140 × 90 × 30 mm (not including projections)
Weight Approximately 230 g
Internal flash
memory
Program file save area (16 MB)
Other (PR5 file save area, ESF file saved area, firmware area, and FPGA area)
FP5 main
unit
Operation mode
Programming GUI operation, standalone operation, remote operation, communication
command operation
AC
adapter
Specifications AC adapters used in each region
Note3
Target host machine IBM PC/AT compatible
Target OS Windows 2000, Windows XP, Windows Vista
USB connector Type mini-B, USB 2.0 (compatible with 1.1)
USB cable Approximately 2 m
Serial connector 9-pin D-SUB male connector for RS-232C @ 9600, 19200, 38400, 57600, 115200 bps
Host
machine
interface
Serial cable Approximately 3 m (cross cable)
Target connector Connector: 15-pin HD-SUB female connector
Protected function: Internal over-voltage input protection circuit
Supported communication mode and rate:
3-wire serial I/O (CSI) (5.0 MHz max.)
3-wire serial I/O with handshake (CSI + HS) (5.0 MHz max.)
Pseudo 3-wire I/O (2.0 kHz max.)
UART (1 Mbps max.)
I
2
C (100 kHz max.)
Target cable Cable length: Approximately 42 cm
FP5 side: 15-pin HD-SUB male connector
Target system side: 16-pin 2.54 mm pitch multipurpose female connector
Power supply
Note 2
1.2 to 5.5 V
Tar get
interface
Note 1
Power supply
detection
Available. Current consumption: 1 mA or less
<R>
To Next Page
Loading...
Need help?
General
