Renesas PG-FP5 User Manual

C-1
REVISION HISTORY
Revisions up to the previous edition are shown below. The “Applied to” column indicates the chapter in each edition to
which the revision was applied.
(1/5)
Edition Description Applied to
1.5.2 Software environment
• Addition of the Caution in (4) Program files
CHAPTER 1
OVERVIEW
2.3.1 FP5 control panel
• Addition of the description in Remark
CHAPTER 2
HARDWARE
CONFIGURATION
4.3.3 [Device] menu (12) (a) <5> [Information] area and Clear button
• Change of the description in Clear button
CHAPTER 4
PROGRAMMING GUI
USAGE
Figure 5-14. Device Setup Dialog Box - [Standard] Tab
• Change of the description of [Communication Interface to device] area
CHAPTER 5
EXAMPLE OF
OPERATION USING
PROGRAMMING GUI
7.2 Remote Connector Pins
• Change of the value1 ms → 50 ms
CHAPTER 7 USAGE
THE REMOTE
CONNECTOR
Table 8-1. List of FP5 Control Commands
• Deletion of the remote command
• Change of the description of the ver command
8.4.6 fcks command
• Change of the input format
length → end
8.5.7 read command
• Change of the description of function
CHAPTER 8 USAGE
COMMUNICATION
COMMANDS
C.1 Absolute Maximum Ratings (TA = 0 to 40°C)
• Addition of "+" or "±" in the rating value
C.2 DC Characteristics (T
A = 0 to 40°C)
• Addition of " −", "+", or "±" in the MAX. value
APPENDIX C
ELECTRICAL
SPECIFICATIONS OF
TARGET INTERFACE
• Addition of APPENDIX D ELECTRICAL SPECIFICATIONS OF REMOTE
INTERFACE
APPENDIX D
ELECTRICAL
SPECIFICATIONS OF
REMOTE INTERFACE
2nd
edition
• Addition of APPENDIX E REVISION HISTORY APPENDIX E
REVISION HISTORY

Renesas PG-FP5 Specifications

General

Brand	Renesas
Model	PG-FP5
Category	Motherboard
Language	English