Renesas PG-FP5 User Manual

C-3
(3/5)
Edition Description Applied to
4.3.2 [Programmer] menu (9) [FP5 Manager] command
• Change of description
4.3.3 [Device] menu (6) [Set Security] command
• Change of description
4.3.3 [Device] menu
• Addition of (9) [Set Option bytes] command, (10) [Set OCD Security ID] command,
and (13) [Get Flash options] command
4.3.3 [Device] menu (14) (a) <4> [Object HEX file] area
• Change of description
4.3.3 [Device] menu (14) (b) <1> [Communication interface to device] area,
<3> [Operation Mode] area
• Change of description
4.3.3 [Device] menu (14) (c) [Advanced] tab in Device Setup dialog box
Change of description
• Change of description
4.4 Toolbar
• Change of description
4.6 Programming Parameter Window
• Change of description
CHAPTER 4
PROGRAMMING GUI
USAGE
• Series of operations described in this chapter
• Change of the description
Figure 5-5. Main Window
Figure 5-6. [Setup] Command
Figure 5-16. Downloading of PR5 File, ESF File and Program File
Figure 5-17. [Autoprocedure(E.P.)] Command
Figure 5-18. [Autoprocedure(E.P.)] Command Execution Result
• Change of figures
(8) System shutdown
• Change of description
CHAPTER 5
EXAMPLE OF
OPERATION USING
PROGRAMMING GUI
Table 6-1. [Commands] Menu
Table 6-3. [Option Setting] Menu
Table 6-4. [Voltage Setting] Menu
• Change of tables
CHAPTER 6 USAGE
IN STANDALONE
MODE
Table 9-3. Target Connector Pin Configuration
• Change of table
CHAPTER 9
CONNECTORS AND
CABLES
3rd
edition
Addition of <4> I
2
C to <6> V850 (Single-wire UART) CHAPTER 10 NOTES
ON TARGET SYSTEM
DESIGN

Renesas PG-FP5 Specifications

General

Brand	Renesas
Model	PG-FP5
Category	Motherboard
Language	English