How to Use This Manual
Target Readers This manual is intended for users who use the PG-FP5 when designing and
developing a system using a Renesas Electronics on-chip flash memory
microcontroller.
Purpose This manual is intended to give users an understanding of the basic specifications
and correct use of the PG-FP5. By using the PG-FP5, programs can be easily erased
from or written to the flash memory of a Renesas Electronics on-chip flash memory
microcontroller, or can be verified on Windows
TM
screens, while the microcontroller is
mounted on the user board.
Organization This manual includes the following sections.
• Overview
• Hardware installation
• Software installation
• Programming GUI usage
• Example of operation using programming GUI
• PG-FP5 operation in standalone mode
• Usage the remote connector
• Usage communication commands
• Connectors and cables
• Notes on target system designs
• Target interface specifications
• Troubleshooting
• Messages
• Supplementary information
• Electrical specifications of target interface
• Electrical specifications of remote interface
How to Read This Manual It is assumed that the readers of this manual have general knowledge of electricity,
logic circuits, and microcontrollers.
To understand the overall operation
→ Read this manual according to the CONTENTS.
The mark <R> shows major revised points. The revised points can be easily
searched by copying an “<R>” in the PDF file and specifying it in the “Find what:”
field.
To Next Page
Loading...
Need help?
General
