Accessing User Tools (Copy/Document Server Features)
107
5
❖
❖❖
❖ Select Stapling Position (Bottom Left)
You can register a type of stapling
used frequently in the bottom left
staple key on the initial display.
You can also change the registered
type.
Note
❒ The Finisher 3000B(100–sheet
staples), Finisher 3000M(50–
sheet staples) or Booklet Finish-
er is required to use this func-
tion.
❖
❖❖
❖ Select Stapling Position (Top Right)
You can register a type of stapling
used frequently in the top right
staple key on the initial display.
You can also change the registered
type.
Note
❒ The Finisher 3000B(100–sheet
staples), Finisher 3000M(50–
sheet staples) or Booklet Finish-
er is required to use this func-
tion.
❖
❖❖
❖ Select Stapling Position (Bottom
Right)
You can register a type of stapling
used frequently in the bottom right
staple key on the initial display.
You can also change the registered
type.
Note
❒ The Finisher 3000B(100–sheet
staples), Finisher 3000M(50–
sheet staples) or Booklet Finish-
er is required to use this func-
tion.
Input/Output
2
/
2
❖
❖❖
❖ Select Stack Function
Specify whether Stack or Rotate
Sort has priority on the initial dis-
play.
Note
❒ An optional finisher is required
to use this function.
❖
❖❖
❖ Select Punch Type
You can select the type of the
punch.
Note
❒ The Finisher 3000B(100–sheet
staples), Finisher 3000M(50–
sheet staples) or Booklet Finish-
er is required to use this func-
tion.
❒ The 4–hole punch type is only
capable of punching in the 4–
hole format.
MartiniC1_GBcopy4_FM.book Page 107 Tuesday, April 23, 2002 6:23 PM
To Next Page
Loading...
Need help?
General
