Settings You Can Change with User Tools
89
5
❖
❖❖
❖ WEP (Encryption) Setting
Specifies the encryption of the Wireless LAN. If this is set to “Effective”, you
must enter the WEP key.
Note
❒ Default setting: Inactive
❖
❖❖
❖ Transmission Speed
Specifies the communication speed of the Wireless LAN.
Note
❒ Default setting: Auto
❖
❖❖
❖ Return to Defaults
You can return the Wireless LAN settings to the default setting.
File Transfer
❖
❖❖
❖ Delivery Option
Enables or disables the function for sending documents stored in this ma-
chine or scanned documents via the ScanRouter V2 Professional/Lite deliv-
ery server.
Note
❒ Default setting: OFF
❒ Set this option when you specify whether or not to use ScanRouter V2 Pro-
fessional/Lite. If you use, you will have to reregister the I/O devices in the
ScanRouter V2 Professional/Lite.
❖
❖❖
❖ Scanner Recall Interval Time
Specifies the interval the machine waits before resending data or a document,
if it could not be sent to ScanRouter V2 Professional.
Note
❒ Default setting: 300 Seconds
❒ The interval time can be set from 60 to 999 seconds in one second incre-
ments using the number keys.
❒ This setting is for the Scanner function.
❖
❖❖
❖ Number of Scanner Recalls
Sets a maximum number of resend documents or data in the machine to the
delivery server.
Note
❒ Default setting: 3 times
❒ The number of times can be set from 1 to 99 using the number keys.
❒ This setting is for the Scanner function.
MartiniC1_GBzen2_FM.book Page 89 Friday, April 19, 2002 2:18 PM
To Next Page
Loading...
Need help?
General
