11
1. Windows 95/98/Me
Configuration
Configuring Windows 95/98/Me
Note
❒ Windows 95/98 does not support IP over 1394.
Printing without a Print Server
The following procedure describes how to configure Windows 95/98/Me to use
the machine on a network without Windows 2000 Server, Windows 2000 Profes-
sional, Windows XP Professional, Windows XP Home Edition, Windows NT
Server, Windows NT Workstation, or NetWare based print server.
A
AA
A
Specify the protocol to use.
Consult your network administrator about which of the three protocols is ap-
propriate.
• TCP/IP
• IPP
• NetBEUI
B
BB
B
Configure the chosen protocol.
• See p.12 “Configuring TCP/IP and IPP for Printing”.
• See p.13 “Configuring NetBEUI for Printing”.
C
CC
C
Install the software and set the printer driver port.
• Install SmartNetMonitor for Client from the CD-ROM labeled “Printer
Drivers and Utilities”. For more information about how to install the soft-
ware and how to specify the printer driver port, see the Printer Reference 1.
Printing with a Windows 2000/XP or Windows NT Print Server
See p.20 “Setting Up a Client Computer” for configuring Windows 95/98/Me
with a Windows 2000/XP or Windows NT print server.
To Next Page
Need help?
General
