Troubleshooting
122
6
x
xx
x Clearing Misfeeds
CAUTION:
Important
❒ When clearing misfeeds, do not turn off the operation switch. If you do, your
copy settings are cleared.
❒ To prevent misfeeds, do not leave any torn scraps of paper within the ma-
chine.
❒ If misfeeds occur repeatedly, contact your service representative.
Note
❒ More than one misfeed location may be indicated. In such a case, check every
applicable area. See the following charts: A, B, C, D, E, F, P, Q, R, U, W
❒ You can find a sticker explaining how to remove misfed paper inside the front
cover or finisher.
• The fusing section of this machine might be very hot. Caution should be tak-
en when removing misfed paper.
MartiniC1_GBzen2_FM.book Page 122 Friday, April 19, 2002 2:18 PM
To Next Page
Loading...
Need help?
General
