51
4. Scanning Originals Using
Network TWAIN Scanner
This chapter describes the operations for scanning originals with the network
TWAIN scanner using DeskTopBinder V2 Lite. In addition, some functions of
the TWAIN driver are introduced.
Flow of Operations
When using DeskTopBinder V2 Lite for scanning, the basic flow of operations is
as follows:
Start up DeskTopBinder V2 Lite and select the scanner.
Place the originals in the scanner.
Make the required scan settings, using the TWAIN driver.
Scan and save the originals.
The scanned image can be edited and printed by DeskTopBinder
V2 Lite.
1
Select Scanner
2
Place Originals
3
Make Scanner
Settings
4
Start to Scan
To Next Page
Need help?
General
