Using PostScript 3
12
1
Duplex Printing
Use this function to select duplex printing.
The following table shows the tabs or menus where you can select this function.
You can select the following items. The following items may vary depending on
the operating system you are using.
Windows 95/98/Me
❖
❖❖
❖ Off
Disables Duplex Printing.
❖
❖❖
❖ Open to Left
Prints output so that you can open it to the left when bound along the left
edge.
❖
❖❖
❖ Open to Top
Prints output so that you can open it to the top when bound along the top
edge.
Windows 2000/XP, Macintosh
Note
❒ If you use a Macintosh, click to select the button that means [Flip on Long Edge]
or [Flip on Short Edge].
❖
❖❖
❖ None
Disables Duplex Printing.
❖
❖❖
❖ Flip on Long Edge
Prints output so that you can open it to the long edge when bound along the
long edge.
❖
❖❖
❖ Flip on Short Edge
Prints output so that you can open it to the short edge when bound along the
short edge.
Windows 95/98/Me [
Duplex
] on the [
Setup
] tab.
Windows 2000/XP [
Print on Both Sides
] on the [
Layout
] tab in the Printing
Preferences dialog box.
Windows NT 4.0 [
Print on Both Sides (Duplex Printing)
] on the [
Page Setup
] tab
in the Document Default dialog box.
Macintosh [
Print on Both Sides
] on [
Layout
] in the print dialog box.