47
4. Windows NT 4.0
Configuration
Configuring Windows NT 4.0
Note
❒ Windows NT 4.0 does not support IP over 1394.
Printing without a Print Server
The following procedure describes how to configure Windows NT 4.0 to use the
machine on a network without Windows 2000 Server, Windows 2000 Profes-
sional, Windows XP Professional, Windows XP Home Edition, Windows NT
Server, Windows NT Workstation or NetWare based print server.
A
AA
A
Specify the protocol to use.
Consult your network administrator about which of the three protocols is ap-
propriate.
• TCP/IP
• IPP
• NetBEUI
B
BB
B
Configure the chosen protocol.
• See p.48 “Configuring TCP/IP and IPP for Printing”.
• See p.49 “Configuring NetBEUI for Printing”.
C
CC
C
Install the software and set the printer driver port.
• Install SmartNetMonitor for Client from the CD-ROM labeled “Printer
Drivers and Utilities”. For more information about how to install the soft-
ware and how to specify the printer driver port, see the Printer Reference 1.
Printing with a LPR Port
See p.56 “Configuring LPR Port Printing” for how to configure a LPR port in
Windows NT 4.0.
Printing with a Windows 2000/XP or Windows NT Print Server
See p.57 “Setting Up a Client Computer” for configuring Windows NT 4.0 with
a Windows 2000/XP or Windows NT print server.
To Next Page
Loading...
Need help?
General
