5
11.
Operation switch
Press this switch to turn the power on
(the On indicator goes on). To turn the
power off, press this switch again (the On
indicator goes off). ⇒”Turning On the
Power” in the General Settings Guide.
12.
Clip Tray
Holds clips and staples.
13.
{
{{
{Sample Copy}
}}
} key
Use this key to make a single sample
copy before starting a long copy run. By
checking the sample copy and making
any necessary changes to the image qual-
ity settings before you make multiple
copies, you can save time and paper. ⇒
p.40 “Sample Copy”
14.
{
{{
{Start}
}}
} key
Press to start copying. Press to start scan-
ning and printing in Document Server
mode.
15.
{
{{
{Clear/Stop}
}}
} key
• Clear
Press to delete a number entered.
• Stop
Press to stop a copy job in progress.
Press to stop Scanning and printing in
Document Server mode.
16.
{
{{
{#}
}}
} key
Press to enter a value.
17.
Number keys
Use to enter the desired number of cop-
ies, and data for selected modes.
18.
Function keys
These keys switch display to the operat-
ing screen of each function. Follow the in-
structions displayed by switching
between screen with the function keys.
19.
Function Status indicator
These show the status of the above func-
tions:
• Green: the function is active.
• Red: the function has been interrupt-
ed.
Common Key Operations
The following keys are common to all screens.
[Exit]
Returns to the previous screen.
[Cancel]
Deletes a selected function or entered values, and then returns
to the previous screen.
[OK]
Acknowledges a selected function or entered values, and then
returns to the previous screen.
[▲Prev.]
[▼Next]
Moves to the previous or next page when all the functions can-
not be displayed on one page.
MartiniC1_GBcopy4_FM.book Page 5 Tuesday, April 23, 2002 6:23 PM
To Next Page
Loading...
Need help?
General
