To Next Page

To Previous Page

Using SmartNetMonitor for Client

SmartNetMonitor for Client is a utility that helps you to use network printers ef-

fectively. It is useful in environments where two or more network printers are

used. It is recommended that you install SmartNetMonitor for Client to use Par-

allel Printing and Recovery Printing. For more information about SmartNet-

Monitor for Client, see SmartNetMonitor for Client Help.

❖

❖❖

❖ SmartNetMonitor for Client features

• Sends a print job directly to the network printers without using a print

server.

• Notifies when a printing error occurs.

• Prints documents using other printers in the printer group when the spec-

ified printer is busy (Recovery Printing).

• Notifies on print job (data sent) completion.

• Equally divides the number of copies to be printed among the selected

printers in the printer group (Parallel Printing).

Important

❒ The following must be the same for the specified printer and the print-

ers selected for Recovery Printing or Parallel Printing.

• Printer models (for Parallel Printing only)

• Installed options (e.g. Paper tray unit)

• Size and orientation of paper in each paper tray unit

• Total memory

• Installed fonts (including the downloaded fonts)

Limitation

❒ When using a computer as a print server, do not use the notification of

print completion function. For more information about how to set this

function to off, see SmartNetMonitor for Client Help.

Note

❒ Failure to meet any of the conditions above may result in unexpected

print results.

Ricoh Aficio 1075 User Manual

Other manuals for Ricoh Aficio 1075