Windows NT 4.0 Configuration
52
4
Installing SmartNetMonitor for Client
Install SmartNetMonitor for Client from the CD-ROM labeled “Printer Drivers
and Utilities”. For more information about how to install, see the Printer Refer-
ence 1.
After the installation is complete, configure the printer port with SmartNetMon-
itor for Client. See p.53 “Setting Up the Printer Driver”.
Deleting the port
The following procedure allows you to delete the printer port. If you want to de-
lete the port which is currently used in Windows, switch the port to another such
as “FILE”, and then delete it. For more information about SmartNetMonitor for
Client, see SmartNetMonitor for Client Help.
A
AA
A
From the [Printers] window, click the icon of the printer which uses Smart-
NetMonitor for Client to print. On the [File] menu, click [Properties].
B
BB
B
Click the [Ports] tab, and then make sure that the SmartNetMonitor for Cli-
ent port is shown in the [Print to the following port] box.
Remember the port name because this port should be deleted later.
C
CC
C
From the [Print to the following port] box, select [FILE].
D
DD
D
Click [Apply].
The port which is currently in use is changed.
E
EE
E
Click [Delete Port].
F
FF
F
After the confirmation message appears, click [Yes].
The port is deleted.
G
GG
G
Click [OK] to close the printer properties.
Uninstalling SmartNetMonitor for Client
Preparation
Before uninstalling SmartNetMonitor for Client, make sure that:
• The port settings dialog box is closed.
• No printer is using the SmartNetMonitor for Client port as a printer port.
• You have performed login with the same user authority as that used to in-
stall SmartNetMonitor for Client.
A
AA
A
Open [Control Panel], and then double-click the [Add/Remove Programs] icon.
To Next Page
Loading...
Need help?
General
