83
7. Appendix
Using SmartNetMonitor for Admin
Using SmartNetMonitor for Admin, not only can you monitor the status of net-
work printers, but you also can change the configuration of the Network Inter-
face Board using the TCP/IP protocol or IPX/SPX protocol.
SmartNetMonitor for Admin is equipped with the following functions.
• Limits the settings to be done from the control panel, and disables changes to
be made to some of the items.
• Enables the selection of paper type loaded in the printer.
• Switches to the Energy Saver mode, and wakes up from the Energy Saver
mode.
• Checks the information on printing, paper exhaustion, and such, on the com-
puter.
• Monitors multiple printers at the same time. When there are many printers,
you can create groups and classify the printers to facilitate management.
• Checks the printer's network settings and detailed information of devices.
• Enables you to change the printer's network settings.
• Checks the number of pages printed for each computer, using the user codes.
Note
❒ Select the appropriate protocol stack for your operating system.
OS Protocol Stack
Microsoft Windows 95/98/Me TCP/IP provided with Windows 95/98/Me
IPX/SPX provided with Windows 95/98/Me
NetWare network client provided with Windows 95/98
Novell Client for Windows 95/98
Microsoft Windows 2000 TCP/IP provided with Windows 2000
IPX/SPX provided with Windows 2000
NetWare Client provided with Windows 2000
Novell Client for Windows NT/2000
Microsoft Windows XP TCP/IP provided with Windows XP
IPX/SPX provided with Windows XP
Microsoft Windows NT 4.0 TCP/IP provided with Windows NT
IPX/SPX provided with Windows NT
Client Service for NetWare provided with Windows NT
Novell Client for Windows NT/2000
To Next Page
Loading...
Need help?
General
