Precautions
137
7
PostScript Printing from Windows
When printing PostScript from Windows, see the PostScript 3 Operating Instruc-
tions Supplement provided as a PDF file on the CD-ROM labeled “Operating In-
structions”.
NetWare Printing
Form Feed
You should not configure the form feed on NetWare. The form feed is controlled
by the printer driver on Windows. If the NetWare form feed is configured, the
printer might not work properly. If you want to change the form feed setting, al-
ways configure it on Windows.
• With Windows 95/98/Me, clear the [Form feed] check box on the [Printer Set-
tings] tab in the printer properties dialog box.
• With Windows 2000/XP, clear the [Form feed] check box on the [NetWare Set-
tings] tab in the printer properties dialog box.
• With Windows NT 4.0, clear the [Form feed] check box on the [NetWare Settings]
tab in the printer properties dialog box.
Banner Page
You should not configure a banner page on NetWare. If you want to change the
banner page setting, always configure it on Windows.
• With Windows 95/98/Me, clear the [Enable banner] check box on the [Printer
Settings] tab in the printer properties dialog box.
• With Windows 2000/XP, clear the [Enable banner] check box on the [NetWare
Settings] tab in the printer properties dialog box.
• With Windows NT 4.0, clear the [Enable banner] check box on the [NetWare Set-
tings] tab in the printer properties dialog box.
Printing after resetting the machine
After resetting the remote printer, the connection from the print server will be
cut off for about 30-40 seconds before re-connecting. Due to the NetWare speci-
fication, print jobs may be accepted, but they will not be printed during this in-
terval.
When using the machine as a remote printer, wait about 2 minutes after resetting
the printer before attempting to print.
To Next Page
Loading...
Need help?
General
