Copying
38
2
Stapling position and original setting
Place all the originals in the automatic
document feeder (ADF) in the orien-
tation in which they can be read nor-
mally. When placing the original on
the exposure glass, keep the same ori-
entation, but set the original facing
downwards. When there is copy pa-
per that is identical in size and orien-
tation to your original, the staple
positions are as follows.
❖
❖❖
❖ Finisher 3000B(100–sheet staples)
*1
This table shows staple positioning.
The orientation of the paper does not
indicate direction of delivery.
*2
You cannot staple at this position
when copying onto A3 or A4 size pa-
per.
*3
If you want to staple at this position
on A3 or A4 size paper, select [
Rotate
]
and then select "Top 2".
❖
❖❖
❖ Finisher 3000M(50–sheet staples)
*1
This table shows staple positioning.
The orientation of the paper does not
indicate direction of delivery.
*2
You cannot staple at this position
when copying onto A3 or A4 size pa-
per.
*3
If you want to staple at this position
on A3 or A4 size paper, select [
Rotate
]
and then select "Top 2".
Original logation
Exposure
glass
Document
Feeder
Stapling
position
Top
Top slant
Bottom
Left 2Top 2
ZGVX090E
Original logation
Exposure
glass
Document
Feeder
Stapling
position
Top
Top slant
Bottom
Left 2Top 2
MartiniC1_GBcopy4_FM.book Page 38 Tuesday, April 23, 2002 6:23 PM
To Next Page
Loading...
Need help?
General
