Remote Maintenance by telnet
123
7
❖
❖❖
❖ Interface domain configuration
The following command displays or sets the Ethernet interface domain name,
the IEEE 1394 interface or the IEEE 802.11b interface.
msh> domainname / interface_name
The following is an example for configuring a domain name on Ethernet in-
terface.
msh> domainname ether
*1
Available when the optional 1394 interface Board is installed.
*2
Available when the optional 802.11b interface kit is installed.
Note
❒ Domain name can contain a maximum of 63 characters.
Interface Interface that can be set
ether Ethernet interface
ip1394
*1
IEEE 1394 interface
wlan
*2
IEEE 802.11b interface
To Next Page
Loading...
Need help?
General
