Scanning Originals
53
4
B Depending on the type of original or the objective for scanning, select
the icon in [Mode].
• [Standard] is suitable for scanning standard originals that comprise
mainly of text.
• [Photo] is suitable for scanning originals that include photos, shaded il-
lustrations, etc.
• [OCR] is suitable for conversion processing with an OCR (Optical Char-
acter Reading) application after scanning the original.
• [Filing] is suitable for use with filing applications, etc.
Note
❒ For advanced settings, click [Detail] to display “Detail Window”. For
more information about the “Detail Window”, see TWAIN Driver Help.
C According to the original scan area and orientation, change the setting of
the [Document] group.
Reference
⇒ p.47 “Original Orientation and Scan Area Setting”
For information about the setting of the [Document] group, see Help.
When you want to configure the scanning area
When you do not configure the scanning area, the area is scanned with the
size specified in the [Size:] box.
A Click [Preview].
The original that was placed is scanned and the [Preview] dialog box is dis-
played. The scanning area in the preview is displayed within the broken
lines.
B Configure the scanning area by dragging a border or the top line.
When reconfiguring the area, click and drag one corner of the area to-
wards its opposite corner.
Note
❒ Depending on the scanning resolution, the area to be scanned may pos-
sibly be subject to restrictions.
C Click [Close].
The [Preview] dialog box closes.
Note
❒ When the original placed in the ADF is previewed, place the original
scanned during preview again.
D
DD
D
Click [Scan].
The original is scanned. A message asking whether there is another original
is displayed. When there is another original to scan, place the original, and
then click [Continue]. When there are no more originals, click [Complete].
To Next Page
Loading...
Need help?
General
