Duplex printing
• [Thick Paper 1]: Supported
• [Thick Paper 2], [Thick Paper 3]: Not
supported
Additional cautions
• Print speed is slightly slower than when using
plain paper.
• When loading paper in the printer paper trays
or the paper feed units, load at least 20
sheets. Also, adjust the side guide so that it
lightly touches the paper.
• Curled paper: If the paper is curled, flatten the
paper before loading it.
• If you are using thick paper with a smooth
surface, paper jams or multiple feeding can
occur. Fan the paper before loading it. If a
paper jam or multiple feeding occurs even
after you have fanned the paper, set the
paper one sheet at a time.
Thin paper
Paper thickness 52 to 59 g/m
2
(14 to 16 lb.)
Printer setup
Select [Paper Input] [Paper Type: Bypass Tray]
[Thin Paper].
Printer driver setup Select [Thin (52 - 60 g/m2)] in [Paper type].
Supported paper feeding tray Bypass tray
Paper capacity
Make sure paper is not stacked higher than the
upper limit mark ( ) inside the tray. When using the
bypass tray, make sure paper is not stacked higher
than the paper guides inside it.
Duplex printing Not supported
Additional cautions
When printing on thin paper, make a test print and
check the print quality. Depending on the type of
paper you are using, print quality may degrade.
5. Paper and Other Media
110
To Next Page
Loading...
Need help?
General