11. Appendix
This chapter explains safety precautions and procedures for moving the printer, consumables, and printer
specifications and option specifications.
Moving and Transporting the Printer
• Disconnect the power plug (by pulling the plug, not the cable) if the power cable or plug becomes
frayed or otherwise damaged.
• It is dangerous to handle the plug with wet hands. Doing this may result in receiving an electric shock.
• Before moving the machine, unplug the power cord from the wall outlet. If the cord is unplugged
abruptly, it could become damaged. Damaged plugs or cords can cause an electrical or fire hazard.
• When moving the printer after use, do not take out any of the toners, black drum unit/color drum
units, nor waste toner bottle to prevent toner spill inside the machine.
• When moving the machine, hold the handles at both sides, and then lift the printer slowly. Lifting it
carelessly or dropping it may cause an injury.
• Be sure to disconnect all cables from the printer before transporting it.
• The printer is a piece of precision machinery. Take care to avoid damage during transportation.
• If optional paper feed units are attached, remove them from the printer and move them separately.
Repack the printer using its original packaging for transporting.
• The printer weighs approximately 97 kg (214 lb.).
Moving the Printer
• When moving the machine, hold the handles at both sides, and then lift the printer slowly. Lifting it
carelessly or dropping it may cause an injury.
• Before moving the machine, unplug the power cable from the wall outlet. If the cable is unplugged
abruptly, it could become damaged. Damaged plugs or cables can cause an electrical or fire hazard.
259
To Next Page
Loading...
Need help?
General