8. On the rear of the unit, attach two brackets using the remaining screws.
Tighten the screws firmly using a coin.
Attaching the 500-sheet/1000-sheet/2000-sheet Paper Feed Unit
This section describes how to attach the 500-sheet paper feed unit, 1000-sheet paper feed unit, and 2000-
sheet paper feed unit. The procedure is the same for all three units. The 1000-sheet paper feed unit is used
as an example.
• The printer weights approximately 97 kg (214 lb.).
• Four or more people are required to move the printer. Hold the handles located on both sides, and
then lift it slowly. Lifting it carelessly or dropping it may cause an injury.
• When using the 1000-sheet paper feed unit with the 500-sheet paper feed unit, attach the 500-sheet
paper feed unit to the 1000-sheet paper feed unit before attaching to the printer.
• When the 1000-sheet paper feed unit is attached, the 2000-sheet paper feed unit cannot be attached.
• When the 2000-sheet paper feed unit is attached, neither the 500-sheet paper feed unit nor the
1000-sheet paper feed unit can be attached.
Attaching the Paper Feed Unit
39
To Next Page
Loading...
Need help?
General