Loading Paper
This section describes how to load paper into the paper tray or onto the bypass tray.
Do not add paper to a tray before it runs out of paper. If you do so, multiple sheets of paper may be fed
at one time, which results in a paper jam.
Paper Tray, 500/1000-sheet Paper Feed Unit
The following example explains how to load paper into paper trays, and how to change paper size.
The same procedure can be used for all trays. Tray 2 is used as an example.
• Make sure paper is not stacked higher than the upper limit mark inside the paper tray. Paper misfeeds
might occur.
• Do not mix different types of paper in the same paper tray.
• During printing, do not open or close the printer covers or bypass tray, or pull out or push in the paper
tray.
1. Carefully pull out the paper tray until it stops.
To Next Page
Loading...
Need help?
General