Duplex printing Supported
Letterhead setup
Default: [Letterhead 1]
If the print quality needs to be improved, select
[Maintenance] [General Settings]
[Letterhead] [Letterhead 1] to [Letterhead 3] to
change the setting value to a different number
depending on the paper thickness that you are
using. High numbered settings allow thicker paper
to be used, but are printed more slowly.
Additional cautions
When loading paper whose orientations are
specified such as letterhead or letter paper,
misprints may occur. Refer to "Printing on paper
whose orientations are specified" for loading
paper.
Label paper
Printer setup
Select [Paper Input] [Paper Type: Bypass Tray]
[Label Paper].
Printer driver setup Select [Labels] in [Paper type].
Supported paper feeding tray Bypass tray
Paper capacity 1
Duplex printing Not supported
Additional cautions
• Print speed is slightly slower than when using
plain paper.
• Shuffle paper before loading the stack onto
the tray, so multiple sheets are not fed in
together.
Coated paper: gloss print
Printer setup
Select [Paper Input] [Paper Type: (tray name)]
[Coated Paper: Gloss Print].
Printer driver setup Select [Coated paper: gloss print] in [Paper type].
5. Paper and Other Media
112
To Next Page
Loading...
Need help?
General