SD CARD APPLI MOVE
SM 5-107 G104
Service
Tables
5.4 SD CARD APPLI MOVE
5.4.1 OVERVIEW
The service program “SD Card Appli Move” (SP5873) enables you to copy
application programs from one SD card to another SD card.
There are two service SD card slots. Model G104 can use slot 3 to store
application programs. Slot 3 is for maintenance work. Because of this, if the
application programs are stored on two SD cards or more,
choose one SD card
from these SD cards or
store all the application programs on one card.
Use extreme caution when using SD Card Appli Move:
1. The authentication data is transferred with the application program from one
SD card to the other SD card. Authentication fails if you try to use the SD card
after you copy the application program from this card to another SD card.
2. Do not use an SD card if it has been used for other work, for example, on a
computer. Normal operation is not guaranteed when such an SD card is used.
3. Keep the SD card in a secure place (Note) after you copy the application
program from one card to another card. This is because: The SD card can
be the only proof that the user is licensed to use the application program.
You may need to check the SD card and its data to solve a problem in the
future.
NOTE: Refer to “Keeping the SD card” at the end of this chapter.
To Next Page
Loading...
Need help?
General
