To Next Page

To Previous Page

SD Card Application Move

G160/G161 5-166 SM

5.4 SD CARD APPLICATION MOVE

5.4.1 OVERVIEW

The service program “SD Card Appli Move” (SP 5873) enables you to copy application

programs from an SD card to another SD card.

There are two SD card slots (center slot is not used). Model G160/G161 can use slot 1 to

store application programs. Slot 3 is for maintenance work and applications for a customer.

Because of this, if the application programs are stored in an SD card or more, a) choose

one SD card from these SD cards and b) store all the application programs on one card.

Use extreme caution when using SD Card Appli Move:

1. The authentication data is transferred with the application program from

an SD card to the other SD card. Authentication fails if you try to use the

SD card after you copy the application program from this card to another

SD card.

2. Do not use an SD card if it has been used for some other work, for

example, on a computer. Normal operation is not guaranteed when such

SD card is used.

3. Keep the SD card in the place (Note) after you copy the application

program from the card to another card. This is because: a) The SD card

can be the only proof that the user is licensed to use the application

program. b) You may need to check the SD card and its data to solve a

problem in the future.

 See “Keeping the SD card” at the end of this chapter.

5.4.2 MOVE EXEC

The program “Move Exec” (SP 5873-1) enables you to copy application programs from the

original SD card to another SD card.

The application programs are copied from slot 3 to slot 1.

Note that the authentication data is also copied with the application program (see

‘Overview’).

CÓPIA NÃO CONTROLADA

Ricoh G104 User Manual

Questions and Answers: