DETAILED DESCRIPTIONS
SM 9 G392
Paper Feed
Unit Type
4000
2.2.2 PAPER LIFT
• The tray arm [A] moves up on the guide slopes [B] of the machine when the tray
is set in the machine.
• The springs [C] lift the bottom plate [D] and the paper stack [E] on the plate.
• The stack of paper contacts the paper feed roller, and this keeps the top sheet of
the stack at the correct paper height.
• The paper pressure lever [F] adjusts the bottom plate pressure. When you load
thin paper (52 ~ 74 g/m
2
, 14 ~ 19 lb), slide this lever to the right. The default
position is to the left.
G105D128.WMF
[A]
[B]
[C]
[D]
[E]
[F]
[A]
To Next Page
Loading...
Need help?
General
