MACHINE INSTALLATION
SM 1-9 G104
Installation
1.2.4 CONNECTING THE POWER CORD
CAUTION
1. Do not touch the plug with wet hands. This causes electrical shock.
2. When you pull the plug out of the socket, grip the plug, not the cord, to
avoid damaging the cord and causing a fire or an electric shock.
NOTE:
1) Make sure to firmly connect the power plug to the socket outlet.
2) The printer must be off when you connect or disconnect the power cord.
1. Make sure that the power switch is
turned off.
2. Plug in the power cord.
3. Turn the power switch on.
NOTE: It can take a few minutes after the
main power comes on before you
can use the machine.
G105I904.WMF
G105I905.WMF
To Next Page
Loading...
Need help?
General
