Service Mode Table
G160/G161 5-158 SM
9912 [ST Sensor]
9912 001 read *EGB
Adjusts the Vcnt. DFU
[Waste Toner NF] Waste Toner Near Full
9914
Specifies the number of sheets to be printed after waste toner near full.
9914 001 Print 1 *EGB
[0 to 5000 / 1250 / 1/step]
9914 002 Print 2 *EGB
[0 to 5000 / 250 / 1/step]
9914 003 Print 3 *EGB
[0 to 5000 / 125 / 1/step]
9914 004 Print 4 *EGB
Specifies the number of sheets to be printed
after replacing the waste toner bottle.
[0 to 5000 / 2500 / 1/step]
9914 005 Detection Times *EGB
Displays the times of waste toner near full.
[0 to 50 / 0 / 1 /step]
9914 006 Near Full Count. *EGB
Displays the total counter for waste toner
near full.
[0 to 100000 / 0 / 1 /step]
9918 [LD Pow. Change] LDB Power Change
9918 001 *EGB
[0 or 1 / 0 / -] Alphanumeric
0: Not execute, 1: Execute
[Vt ShiftAdj Mode]
9923
These SP's measure the Vt values at regular speed or low speed. DFU
9923 001 Vt ShiftAdj Mode *EGB
9923 002 [K]Vt Shift *EGB
9923 003 [M]Vt Shift *EGB
9923 004 [C]Vt Shift *EGB
9923 005 [Y]Vt Shift *EGB
9923 006 [K]Vt Normal Speed *EGB
9923 007 [M]Vt Normal Speed *EGB
9923 008 [C]Vt Normal Speed *EGB
9923 009 [Y]Vt Normal Speed *EGB
9923 010 [K]Vt Half Speed *EGB
9923 011 [M]Vt Half Speed *EGB
To Next Page
Loading...
Need help?
General
